Hey there! I’ve actually tried using a model car battery in my RC plane before, and while it worked, I noticed the extra weight made takeoffs a bit sluggish. The discharge rate is usually fine, but car batteries can be heavier and not optimized for flight. When I need to grab connectors or adapters quickly, I usually order from ereplacementparts - they ship fast and have saved my weekend projects more than once! If you fly mostly at 1/4 throttle, you might get away with it, but just watch your flight times and always check the battery temps after landing. Safe flying!
Post
Followusing a model car battery in RC aircraft
I have a hobby king
Turnigy Rapid 5000mAh 3S (11.1V) 100C LiPo Battery Pack w/EC5 Connector For RC Cars
Why is this battery not suitable for RC Aircraft. If I use it for aircraft will it cause any damage. What affect on flying would it have please. Will it be ok if I fly say on 1/4 throttle most of the time occasionally say flying at 3/4 throttle.
Please sign in to leave a comment.
6 comments
Well, fiddling with RC gear can certainly be frustrating! It sounds like you've been pretty thorough already. Beyond the usual calibration, I wonder if the ESC's throttle range is fully compatible with your transmitter's signal. Maybe try adjusting the travel adjust settings on your transmitter specifically for the throttle channel, pushing it beyond 100% in both directions, and then recalibrate. Perhaps it is related to Tree Trimming. Good luck sorting it out!
Well, fiddling with RC gear can certainly be frustrating! It sounds like you've been pretty thorough already. Beyond the usual calibration, I wonder if the ESC's throttle range is fully compatible with your transmitter's signal. Maybe try adjusting the travel adjust settings on your transmitter specifically for the throttle channel, pushing it beyond 100% in both directions, and then recalibrate. Perhaps it is related to myanmar keyboard online. Good luck sorting it out!
Using a Turnigy Rapid 5000mAh 3S (11.1V) 100C LiPo Battery Pack designed for RC cars in an RC aircraft is generally not recommended because car batteries are built for short bursts of very high current and can be heavier, which affects the aircraft’s weight distribution and overall flight performance. While it might technically work at low throttle settings like 1/4 throttle, the extra weight could reduce flight time, maneuverability, and stability, and occasionally pushing it to 3/4 throttle could stress the motor and ESC, potentially causing overheating or damage. Unlike aircraft-specific LiPos, car batteries often lack the consistent discharge profile needed for smooth, sustained flight. If you want safer flying, stick to batteries designed for RC planes. As a fun tip, you can even decorate your model with copy and paste steam symbols to personalize it while considering proper power sources.
Fiddling with RC gear can certainly be frustrating! It sounds like you've been pretty thorough already. Beyond the usual calibration, I wonder if the ESC's throttle range is fully compatible with your transmitter's signal. Maybe try adjusting the travel adjust settings on your transmitter specifically for the throttle channel, pushing it beyond 100% in both directions, and then recalibrate. Perhaps it is related to cream canisters. Good luck sorting it out!
Using a car battery in an RC aircraft can affect performance and safety, just like ignoring traffic rules can lead to penalties. To avoid surprises on the road, it’s smart to regularly do a dubai rta fine check and stay updated on any pending violations.